Metal immobilization by sludge-derived biochar: roles of mineral oxides and carbonized organic compartment

Pyrolyzing sludge into biochar is a potentially promising recycling/disposal solution for municipal wastewater sludge, and the sludge-derived biochar (SDBC) presents an excellent sorbent for metal immobilization. As SDBC is composed of both mineral oxides and carbonized organic compartment, this study therefore compared the sorption behaviour of Pb and Zn on SDBC to those of individual and mixture of activated carbon (AC) and amorphous aluminium oxide (Al₂O₃). Batch experiments were conducted at 25 and 45 °C, and the metal-loaded sorbents were artificially aged in the atmosphere for 1–60 days followed by additional sorption experiments. The Pb sorption was generally higher than Zn sorption, and the co-presence of Pb reduced Zn sorption on each studied sorbent. Higher sorption capacities were observed at 45 °C than 25 °C for SDBC and AC, while the opposite was shown for Al₂O₃, indicating the significance of temperature-dependent diffusion processes in SDBC and AC. Nevertheless, metal sorption was more selective on Al₂O₃ that showed a greater affinity towards Pb over Zn under competition, correlating with the reducible fraction of sequential extraction. Furthermore, significant amounts of Pb and Zn were additionally sorbed on SDBC following 30-day ageing. The X-ray diffraction revealed the formation of metal-phosphate precipitates, while the X-ray photoelectron spectroscopy showed a larger quantity of metal–oxygen bonding after 30-day ageing of metal-loaded SDBC. The results may imply favourable long-term transformation and additional sorption capacity of SDBC. In conclusion, SDBC resembles the sorption characteristics of both organic and mineral sorbents in different aspects, presenting an appropriate material for metal immobilization during soil amendment.     

Hereditary multiple intestinal atresia—ultrasound findings and outcome of pregnancy in an affected case

A case of multiple intestinal atresia is described. Dilatation of the bowel was observed at 17 weeks' gestation during routine ultrasound scan of a healthy Caucasian primigravida from a non-consanguineous marriage. Amniocentesis was performed. The karyotype was normal male and cystic fibrosis screening was negative. Regular scans were performed throughout the pregnancy and a simple bowel obstruction was suspected. The baby was delivered at 37 weeks' gestation in good condition. Initial clinical examination was normal but abdominal distension developed during the first day. At laparotomy, prepyloric septal atresia, a distal duodenal membrane, and multiple intestinal atresia were found. The baby died aged 4 days. Post-mortem examination of the abdomen confirmed the absence of lumen from long segments of the small intestine together with areas of colonic atresia. Histology and distribution were consistent with those reported in familial multiple intestinal atresia. The pitfalls in the interpretation of prenatal ultrasound scans and the possibility of prenatal diagnosis in future pregnancies are discussed.     

烟酰胺降解菌的筛选及其降解特性

采用HPLC对某烟酰胺生产废水的主要成分进行分析，并模拟废水中的主要成分烟酰胺（nicotinamide）的浓度，对以烟酰胺为唯一碳源配制的培养基进行降解实验，获得有较佳降解率和生长能力的菌株YSI-1和YSI-2。结果表明．YSI菌株的混合菌降解效果优于单株菌，混合菌在初始OD600值为0．4，pH为7．0时，对浓度为2000mg／L的烟酰胺降解2d的降解率可达32．8％。延长处理时间或提高菌种的初始OD600值，烟酰胺的去除率均有较大的增加。     

Risk assessment of PCDD/Fs levels in human tissues related to major food items based on chemical analyses and micro-EROD assay

Nine groups of food items (freshwater fish, marine fish, pork, chicken, chicken eggs, leafy, non-leafy vegetables, rice and flour) and three types of human samples (human milk, maternal serum and cord serum) were collected for the analysis of PCDD/Fs. Results of chemical analysis revealed PCDD/Fs concentrations (pg g^− 1 fat) in the following ascending order: pork (0.289 pg g^− 1 fat), grass carp (Ctenopharyngodon idellus) (freshwater fish) (0.407), golden thread (Nemipterus virgatus) (marine fish) (0.511), chicken (0.529), mandarin fish (Siniperca kneri) (marine fish) (0.535), chicken egg (0.552), and snubnose pompano (Trachinotus blochii) (marine fish) (1.219). The results of micro-EROD assay showed relatively higher PCDD/Fs levels in fish (2.65 pg g^− 1 fat) when compared with pork (0.47), eggs (0.33), chicken (0.13), flour (0.07), vegetables (0.05 pg g^− 1 wet wt) and rice (0.05). The estimated average daily intake of PCDD/Fs of 3.51 pg EROD-TEQ/kg bw/day was within the range of WHO Tolerable Daily Intake (1–4 pg WHO-TEQ/kg bw/day) and was higher than the Provisional Tolerable Daily Intake (PMTL) (70 pg for dioxins and dioxin-like PCBs) recommended by the Joint FAO/WHO Expert Committee on Food Additives (JECFA) [Joint FAO/WHO Expert Committee on Food Additives (JECFA), Summary and conclusions of the fifty-seventh meeting, JECFA, 2001.]. Nevertheless, the current findings were significantly lower than the TDI (14 pg WHO-TEQ/kg/bw/day) recommended by the Scientific Committee on Food of the Europe Commission [European Scientific Committee on Food (EU SCF), Opinions on the SCF on the risk assessment of dioxins and dioxin-like PCBs in food, 2000.]. However, it should be noted that micro-EROD assay overestimates the PCDD/Fs levels by 2 to 7 folds which may also amplify the PCDD/Fs levels accordingly. Although the levels of PCDD/Fs obtained from micro-EROD assay were much higher than those obtained by chemical analysis by 2 to 7 folds, it provides a cost-effective and rapid screening of dioxin levels in food and human samples.     

A GIS‐ASSISTED DISTRIBUTED WATERSHED MODEL FOR SIMULATING FLOODING AND INUNDATION1

ABSTRACT: A distributed watershed model combining kinematic wave routing, 1‐D dynamic channel‐flow routing, and 2‐D diffusive overland‐flow routing has been developed to simulate flooding and inundation levels of large watersheds. The study watershed was linked to a GIS database and was divided into an upstream mountainous area and a downstream alluvial plain. A kinematic wave routing was adopted at the mountainous area to compute the discharge flowing into the alluvial plain. A 1‐D dynamic channel routing solving the St. Venant equations by the Preissmann method was performed for the main channel of the alluvial plain, whereas a 2‐D overland‐flow routing solving the diffusion wave equation with the Alternating Direction Explicit scheme was used for floodplains. The above two routings were connected by weir‐link discharge formula. The parameters in the model were calibrated and independently verified by single‐event storms. An example application of flooding/inundation analysis was conducted for the Taichung station and the Woozi depot (Taiwan High Speed Rail). Suggested inundation‐proofing measures ‐ including raising ground surface elevation of the station and depot and building a waterproofing exterior wall and their combination ‐ were investigated. It was concluded that building the waterproofing exterior wall had a strong tendency to decrease peak inundation depth.     

Region of influence method improves macroinvertebrate predictive models in Maryland

Stream biological assessment reflects not just conventional water quality, but an environmental quality that represents the integrity of the stream ecosystem. In Britain, Australia and the United States, macroinvertebrate predictive models were built and applied to stream assessment by employing multivariate analysis. There were variations in these models, where adaptations were made for different regions, but the philosophy underlying the models was similar: employ site classification to predict expected assemblage. Taxon assemblage is predicted from reference groups with similar stream features; these resulting models are RIVPACS-style models. Because every site has to belong to one group in the classification process, each reference group might include some dissimilar sites, and their dissimilarity in taxon assemblage impaired the results of taxon predictions from these models. To avoid this limitation, this study employed a Region-of-Influence-style (ROI-style) modeling method, selecting only similar reference sites and allowing each site to build its own reference group.Three different Region-of-Influence selection schemes were applied to improve the macroinvertebrate predictive model in Maryland: the Assessment by Nearest Neighbour Analysis (ANNA), the Burn's Region of Influence (BROI), and the New Datum Region of Influence (NROI) predictive schemes. The prediction results from ANNA, BROI, and NROI were compared, and the reference selections of each predictive scheme were examined. The comparison showed no preference for the total number of reference sites used by either predictive scheme. The number of reference sites did not correlate to the quality of reference sites used and thus does not control the predictability. The ROI-style model in Maryland had better prediction performance than the RIVPACS-style models, and could improve the bioassessment of streams.     

Effects of solution chemistry on arsenic(Ⅴ) removal by low-cost adsorbents

Natural and anthropogenic arsenic （As） contamination of water sources pose serious health concerns, especially for small communities in rural areas. This study assessed the applicability of three industrial byproducts （coal fly ash, lignite, and green waste compost） as the low-cost adsorbents for As（V） removal under various field-relevant conditions （dissolved oxygen, As（V）/Fe ratio, solution pH, and presence of competing species）. The physico-chemical properties of the adsorbents were characterized by XRD, XRF, FT-IR, and NMR analysis. Batch experiments demonstrated that coal fly ash could provide effective As（V） removal （82.1%-95%） because it contained high content of amorphous iron/aluminium hydroxides for As（V） adsorption and dissolvable calcium minerals for calcium arsenate precipitation. However, the addition of lignite and green waste compost was found unfavourable since they hindered the As（V） removal by 10%-42% possibly due to dissolution of organic matter and ternary arsenate-iron-organic matter complexes. On the other hand, higher concentrations of dissolved iron （comparing As（V）/Fe ratios of 1：1 and 1：10） and dissolved oxygen （comparing 0.2 and 6 mg/L） only marginally enhanced the As（V） removal at pH 6 and 8. Thus, addition of dissolved iron, water aeration, or pH adjustment became unnecessary because coal fly ash was able to provide effective As（V） removal under the natural range of geochemical conditions. Moreover, the presence of low levels of background competing （0.8 or 8 mg/L of humic acid, phosphate, and silicate） imposed little influence on As（V） removal, possibly because the high adsorption capacity of coal fly ash was far from exhaustion. These results suggested that coal fly ash was a potentially promising adsorbent that warranted further investigation.     

Removal of Pb and MDF from contaminated soils by EDTA- and SDS-enhanced washing

Heavy metal- and organic-contaminated sites are ubiquitous, but few studies have been conducted to address such an issue. EDTA- and SDS-enhanced washing was studied for remediation of Pb- and/or marine diesel fuel (MDF)-contaminated soils. The feasibility of recovery and reuse of EDTA and SDS, as well as the physicochemical interactions among the chemical agents, contaminants and soils were extensively investigated using batch experiments. The optimal washing sequence was then determined. The experimental results showed that EDTA could be recovered and reused for four cycles without significant loss of its chelating capacity, while the extraction capability of SDS was noticeably reduced after each reuse cycle. The free phase of marine diesel fuel (MDF) in soils physically isolated the sorbed Pb on soils and thus reducing its extraction by EDTA. The presence of SDS alone or together with low concentration of EDTA was found to enhance Pb removal probably via electrostatic interaction and dissolution of soil organic matter. However, it hindered Pb extraction by high concentration of EDTA, because of the potential formation of complexes between some strongly-bound Pb and SDS, that are more resistant to desorption. Therefore, EDTA washing followed by SDS achieved the highest Pb removal efficiency. On the other hand, MDF removal by SDS was significantly hindered by coexisting Pb in soils, probably because the formation of Pb-dodecyl sulfate (DS) complex would decrease the effective amount of SDS available for forming micelles in solution and enhance MDF sorption. EDTA alone or together with SDS could enhance MDF removal, but the residual MDF after EDTA-washing became more resistant to SDS removal. Consequently, SDS washing followed by EDTA is considered as the optimal washing sequence for MDF removal.     

Large-scale impact of CO2 storage in deep saline aquifers: A sensitivity study on pressure response in stratified systems

Large volumes of CO₂ captured from carbon emitters (such as coal-fired power plants) may be stored in deep saline aquifers as a means of mitigating climate change. Storing these additional fluids may cause pressure changes and displacement of native brines, affecting subsurface volumes that can be significantly larger than the CO₂ plume itself. This study aimed at determining the three-dimensional region of influence during/after injection of CO₂ and evaluating the possible implications for shallow groundwater resources, with particular focus on the effects of interlayer communication through low-permeability seals. To address these issues quantitatively, we conducted numerical simulations that provide a basic understanding of the large-scale flow and pressure conditions in response to industrial-scale CO₂ injection into a laterally open saline aquifer. The model domain included an idealized multilayered groundwater system, with a sequence of aquifers and aquitards (sealing units) extending from the deep saline storage formation to the uppermost freshwater aquifer. Both the local CO₂-brine flow around the single injection site and the single-phase water flow (with salinity changes) in the region away from the CO₂ plume were simulated. Our simulation results indicate considerable pressure buildup in the storage formation more than 100 km away from the injection zone, whereas the lateral distance migration of brine is rather small. In the vertical direction, the pressure perturbation from CO₂ storage may reach shallow groundwater resources only if the deep storage formation communicates with the shallow aquifers through sealing units of relatively high permeabilities (higher than 10^?18 m²). Vertical brine migration through a sequence of layers into shallow groundwater bodies is extremely unlikely. Overall, large-scale pressure changes appear to be of more concern to groundwater resources than changes in water quality caused by the migration of displaced saline water.     

Lack of mtDNA and morphological differentiation between two acorn barnacles <Emphasis Type="Italic">Tetraclita japonica</Emphasis> and <Emphasis Type="Italic">T. formosana</Emphasis> differing in parietes colours and geographical distribution

Tetraclita japonica and T. formosana are common intertidal barnacles with similar morphology, which leads to uncertainty in their species status. In the present study, we try to elucidate the taxonomic status of the two taxa using morphology and mitochondrial control region and cytochrome c oxidase subunit I (COI) sequences of the barnacles in their distribution range. The two taxa were found to be morphologically similar; a diagnostic difference between them was only observed in the colour of the parietes and opercular plates. Little genetic differentiation was detected in the control region and COI (Φ_CT < 0.025 for both markers) between two taxa, but differentiation was found between the southern (Taiwan and Hong Kong) and northern (Japan) populations of T. japonica/T. formosana, which might be the result of isolation by distance and upwelling in summer. Our data suggest that the two presently recognized species probably represent two colour morphotypes of the same species exhibiting different geographical distribution. T. japonica is abundant in Japan and southeast coast of China, whereas T. formosana is only abundant in Taiwan. The heterogeneous environment might exert a divergent selection pressure leading to asymmetric distribution of the two colour morphotypes. The different colours might be a result of either phenotypic plasticity adaptive to environmental variables or genetic hitchhiking of local adaptive genotypes. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.